Fibaro Walli Switch Z-Wave EU | FGWDSEU-221

Kodas: FGWDSEU-221

(0/5, įvertino 0)

Kaina: 45,81 €

	Gaukite į namus už 4,00€ * Pristatysime per 2-4 d.d.
Garantija 24mėn.	Atsiimkite nemokamai. Paruošime per 2-4 d.d.

Kiekis:

Likutis: 3

Garantija: 24 mėn

Pasirinktas prekių kiekis didesnis už likutį. Į krepšelį bus pridėtas turimas kiekis

Klausk apie prekę

Gaukite į namus už 4,00€ *
Pristatysime per 2-4 d.d.

Atsiimkite nemokamai.
Paruošime per 2-4 d.d.

Specifikacija

AC input frequency	Hz	AC input voltage	V
Colour of product	White	Connectivity technology	Wireless
Depth	cm	Embeeded battery	No
Frequency range		Gross depth (mm)	115.00mm
Gross height (mm)	140.00mm	Gross weight	kg
Gross width (mm)	75.00mm	Height	cm
Input connection type	Type F (Schuko)	LED indicators	Yes
Maximum indoor range	m	Maximum outdoor range	m
Maximum power	W	Net weight	0.113kg
Other features	Power Supply 110-230V~ 50/60 Hz. Recommended external overcurrent protection 10A type B circuit breaker (EU) 13A type B circuit breaker (Sweden). Active element micro-gap relay μ. Recommended wires cross-section area between 1.5-4.0mm2. For installation in flush-mounted boxes Ø = 60mm depth ≥ 40mm. Operating temperature 0-35 °C. Ambient humidity 10–95% RH without condensation.	Output connection type	Type F (Schuko)
Output interface		Overload protection
Packing quantity	1.00pc(s)	Paper/Pasteboard	60g
Plastic (No PET)	15g	Power consumption (economy mode)	W
Power consumption (typical)	W	Producer product name	Walli Switch
Remotely operated		Sockets quantity
Special features	The FIBARO Walli Switch is a small flush-mounted module combined with an optically appealing switch which can be used to switch one or two light sources. So you can switch off the light even when you are not at home. The small FIBARO Walli Switch measures the active power and the energy consumption. With its LED ring you are informed about the current energy consumption. The installation is easy and can be carried out according to your individual wishes. Use the included switch, which was inspired by the timeless elegance and flowing appearance of a pearl, or your own switch series (GIRA System 55**, Legrand Celiane, Schneider Odace). The FIBARO Walli Switch can be used for the following luminaires: conventional incandescent lamps and halogen lamps, LED lamps, fluorescent lamps, electronic transformers (for ELV halogen lamps and LED light bulbs), ferromagnetic transformers (for MLV halogen lamps).	Supported network protocols	Z-Wave EU
Tare weight (kg)	0.075kg	Type	Actors
Transmit power	mW	USB charging port	No
Volume (m3)	0.00m³	Warranty	24month(s)
WEEE tax	No

AC input frequency	Hz
AC input voltage	V
Colour of product	White
Connectivity technology	Wireless
Depth	cm
Embeeded battery	No
Frequency range
Gross depth (mm)	115.00mm
Gross height (mm)	140.00mm
Gross weight	kg
Gross width (mm)	75.00mm
Height	cm
Input connection type	Type F (Schuko)
LED indicators	Yes
Maximum indoor range	m
Maximum outdoor range	m
Maximum power	W
Net weight	0.113kg
Other features	Power Supply 110-230V~ 50/60 Hz. Recommended external overcurrent protection 10A type B circuit breaker (EU) 13A type B circuit breaker (Sweden). Active element micro-gap relay μ. Recommended wires cross-section area between 1.5-4.0mm2. For installation in flush-mounted boxes Ø = 60mm depth ≥ 40mm. Operating temperature 0-35 °C. Ambient humidity 10–95% RH without condensation.
Output connection type	Type F (Schuko)
Output interface
Overload protection
Packing quantity	1.00pc(s)
Paper/Pasteboard	60g
Plastic (No PET)	15g
Power consumption (economy mode)	W
Power consumption (typical)	W
Producer product name	Walli Switch
Remotely operated
Sockets quantity
Special features	The FIBARO Walli Switch is a small flush-mounted module combined with an optically appealing switch which can be used to switch one or two light sources. So you can switch off the light even when you are not at home. The small FIBARO Walli Switch measures the active power and the energy consumption. With its LED ring you are informed about the current energy consumption. The installation is easy and can be carried out according to your individual wishes. Use the included switch, which was inspired by the timeless elegance and flowing appearance of a pearl, or your own switch series (GIRA System 55**, Legrand Celiane, Schneider Odace). The FIBARO Walli Switch can be used for the following luminaires: conventional incandescent lamps and halogen lamps, LED lamps, fluorescent lamps, electronic transformers (for ELV halogen lamps and LED light bulbs), ferromagnetic transformers (for MLV halogen lamps).
Supported network protocols	Z-Wave EU
Tare weight (kg)	0.075kg
Type	Actors
Transmit power	mW
USB charging port	No
Volume (m3)	0.00m³
Warranty	24month(s)
WEEE tax	No