Fibaro Walli Switch Z-Wave EU | FGWDSEU-221

Kodas: FGWDSEU-221
(0/5, įvertino 0)
(0 vertinimų) | Įvertinti

Kaina:  55,36 €

Gaukite į namus už 3,90€ *
Pristatysime per 2-4 d.d.
Garantija 24mėn.Atsiimkite nemokamai.
Paruošime per 2-4 d.d.

Likutis: 4

Garantija: 24 mėn

Pasirinktas prekių kiekis didesnis už likutį. Į krepšelį bus pridėtas turimas kiekis
Klausk apie prekę
Gaukite į namus už 3,90€ *
Pristatysime per 2-4 d.d.
Atsiimkite nemokamai.
Paruošime per 2-4 d.d.

Sockets quantity
LED indicators Yes
Packing quantity 1.00pc(s)
Remotely operated
Power consumption (economy mode) W
Output connection type Type F (Schuko)
Net weight 0.113kg
USB charging port No
Transmit power mW
Embeeded battery No
Connectivity technology Wireless
Input connection type Type F (Schuko)
Maximum power W
Supported network protocols Z-Wave EU
Other features Power Supply 110-230V~ 50/60 Hz. Recommended external overcurrent protection 10A type B circuit breaker (EU) 13A type B circuit breaker (Sweden). Active element micro-gap relay μ. Recommended wires cross-section area between 1.5-4.0mm2. For installation in flush-mounted boxes Ø = 60mm depth ≥ 40mm. Operating temperature 0-35 °C. Ambient humidity 10–95% RH without condensation.
Gross weight kg
Gross height (mm) 140.00mm
AC input voltage V
Producer product name Walli Switch
Gross width (mm) 75.00mm
Power consumption (typical) W
Volume (m3) 0.00m³
Output interface
Paper/Pasteboard 60g
Maximum indoor range m
Gross depth (mm) 115.00mm
Depth cm
Plastic (No PET) 15g
Warranty 24month(s)
WEEE tax No
Maximum outdoor range m
Colour of product White
Frequency range
Overload protection
Tare weight (kg) 0.075kg
Special features The FIBARO Walli Switch is a small flush-mounted module combined with an optically appealing switch which can be used to switch one or two light sources. So you can switch off the light even when you are not at home. The small FIBARO Walli Switch measures the active power and the energy consumption. With its LED ring you are informed about the current energy consumption. The installation is easy and can be carried out according to your individual wishes. Use the included switch, which was inspired by the timeless elegance and flowing appearance of a pearl, or your own switch series (GIRA System 55**, Legrand Celiane, Schneider Odace). The FIBARO Walli Switch can be used for the following luminaires: conventional incandescent lamps and halogen lamps, LED lamps, fluorescent lamps, electronic transformers (for ELV halogen lamps and LED light bulbs), ferromagnetic transformers (for MLV halogen lamps).
Height cm
Type Actors
AC input frequency Hz
Vartotojų atsiliepimai Palikti atsiliepimą
Palikti atsiliepimą gali tik registruoti vartotojai

Pirkėjai kartu įsigijo

43,44 €
Į palyginimą

Fibaro Walli Switch Z-Wave EU tai prekė esanti Protingas namas kategorijoje.