Fibaro Walli Dimmer Z-Wave EU | FGWDEU-111

Kodas: FGWDEU-111

(0/5, įvertino 0)

Kaina: 45,81 €

	Gaukite į namus už 4,00€ * Pristatysime per 2-4 d.d.
Garantija 24mėn.	Atsiimkite nemokamai. Paruošime per 2-4 d.d.

Kiekis:

Likutis: 4

Garantija: 24 mėn

Pasirinktas prekių kiekis didesnis už likutį. Į krepšelį bus pridėtas turimas kiekis

Klausk apie prekę

Gaukite į namus už 4,00€ *
Pristatysime per 2-4 d.d.

Atsiimkite nemokamai.
Paruošime per 2-4 d.d.

Specifikacija

AC input frequency	Hz	AC input voltage	V
Colour of product	White	Connectivity technology	Wireless
Depth	cm	Embeeded battery	No
Frequency range		Gross depth (mm)	115.00mm
Gross height (mm)	140.00mm	Gross weight	kg
Gross width (mm)	75.00mm	Height	cm
Input connection type		LED indicators
Maximum indoor range	m	Maximum outdoor range	m
Maximum power	W	Net weight	0.113kg
Other features	Power Supply 110-230V~ 50/60 Hz. Recommended external overcurrent protection 10A type B circuit breaker (EU) 13A type B circuit breaker (Sweden). Recommended wires cross-section area between 1.5-4.0mm2. For installation in flush-mounted boxes Ø = 60mm depth ≥ 40mm. Operating temperature 0-35 °C. Ambient humidity 10–95% RH without condensation. Power Output 50-350W – resistive loads (incandescent and halogen); 50-300VA – resistive-capacitive loads (fluorescent tube lamp, electronic transformer, LED); 50-300VA – resistive-inductive loads (ferromagnetic transformers); 5-50W – with Bypass 2: fluorescent tube lamp or LED.	Output connection type
Output interface		Overload protection
Packing quantity	1.00pc(s)	Paper/Pasteboard	60g
Plastic (No PET)	15g	Power consumption (economy mode)	W
Power consumption (typical)	W	Producer product name	Walli Dimmer
Remotely operated	Yes	Sockets quantity
Special features	The FIBARO Walli Dimmer is a small flush-mounted module combined with a visually appealing switch, which can be used to dim the existing lighting. So you always adjust your lighting to the respective occasion. The small FIBARO Walli dimmer measures the active power as well as the energy consumption. With its LED ring you are informed about the current energy consumption. The installation is easy and can be carried out according to your individual wishes. Use the included switch, which was inspired by the timeless elegance and flowing appearance of a pearl, or your own switch series (GIRA System 55**, Legrand Celiane, Schneider Odace). The FIBARO Walli Dimmer can be used for the following luminaries: conventional incandescent lamps and halogen ELV halogen lamps and dimmable LED bulbs (with electronic transformers) MLV halogen lamps (with ferromagnetic transformers) dimmable LED bulbs dimmable compact fluorescent CFL tube lamps The FIBARO Walli Dimmer can also be used in combination with the well-known FIBARO Bypass 2 (FIB_FGB-002) to dim and switch LED lamps and energy-saving lamps without flickering.	Supported network protocols	Z-Wave EU
Tare weight (kg)	0.075kg	Type	Actors
Transmit power	mW	USB charging port
Volume (m3)	0.00m³	Warranty	24month(s)
WEEE tax	No

AC input frequency	Hz
AC input voltage	V
Colour of product	White
Connectivity technology	Wireless
Depth	cm
Embeeded battery	No
Frequency range
Gross depth (mm)	115.00mm
Gross height (mm)	140.00mm
Gross weight	kg
Gross width (mm)	75.00mm
Height	cm
Input connection type
LED indicators
Maximum indoor range	m
Maximum outdoor range	m
Maximum power	W
Net weight	0.113kg
Other features	Power Supply 110-230V~ 50/60 Hz. Recommended external overcurrent protection 10A type B circuit breaker (EU) 13A type B circuit breaker (Sweden). Recommended wires cross-section area between 1.5-4.0mm2. For installation in flush-mounted boxes Ø = 60mm depth ≥ 40mm. Operating temperature 0-35 °C. Ambient humidity 10–95% RH without condensation. Power Output 50-350W – resistive loads (incandescent and halogen); 50-300VA – resistive-capacitive loads (fluorescent tube lamp, electronic transformer, LED); 50-300VA – resistive-inductive loads (ferromagnetic transformers); 5-50W – with Bypass 2: fluorescent tube lamp or LED.
Output connection type
Output interface
Overload protection
Packing quantity	1.00pc(s)
Paper/Pasteboard	60g
Plastic (No PET)	15g
Power consumption (economy mode)	W
Power consumption (typical)	W
Producer product name	Walli Dimmer
Remotely operated	Yes
Sockets quantity
Special features	The FIBARO Walli Dimmer is a small flush-mounted module combined with a visually appealing switch, which can be used to dim the existing lighting. So you always adjust your lighting to the respective occasion. The small FIBARO Walli dimmer measures the active power as well as the energy consumption. With its LED ring you are informed about the current energy consumption. The installation is easy and can be carried out according to your individual wishes. Use the included switch, which was inspired by the timeless elegance and flowing appearance of a pearl, or your own switch series (GIRA System 55**, Legrand Celiane, Schneider Odace). The FIBARO Walli Dimmer can be used for the following luminaries: conventional incandescent lamps and halogen ELV halogen lamps and dimmable LED bulbs (with electronic transformers) MLV halogen lamps (with ferromagnetic transformers) dimmable LED bulbs dimmable compact fluorescent CFL tube lamps The FIBARO Walli Dimmer can also be used in combination with the well-known FIBARO Bypass 2 (FIB_FGB-002) to dim and switch LED lamps and energy-saving lamps without flickering.
Supported network protocols	Z-Wave EU
Tare weight (kg)	0.075kg
Type	Actors
Transmit power	mW
USB charging port
Volume (m3)	0.00m³
Warranty	24month(s)
WEEE tax	No