Mikrotik CRS310-1G-5S-4S+OUT netFiber 9, 1xGigabit LAN port, 5xSFP ports, 4x SFP+ ports, Serial console port (RJ45), 802.3af/at PoE in, CPU temperature monitor, Router OS | Cloud Router Switch | CRS310-1G-5S-4S+OUT, NetFiber 9 | No Wi-Fi | 10/100/1000 Mbit/s | Ethernet LAN (RJ-45) ports 1 | Mesh Support No | MU-MiMO No | No mobile broadband | Antenna type

Kodas: CRS310-1G-5S-4S+OUT

(0/5, įvertino 0)

(0 vertinimų) | Įvertinti

199,72 €

Kaina: 161,07 €

	Gaukite į namus už 4,00€ * Pristatysime per 2-4 darbo dienas
Garantija 12mėn.	Atsiimkite nemokamai. Paruošime per 2-4 darbo dienas

Kiekis:

Likutis: 4

Garantija: 12 mėn

Pasirinktas prekių kiekis didesnis už likutį. Į krepšelį bus pridėtas turimas kiekis

Klausk apie prekę

Gaukite į namus už 4,00€ *
Pristatysime per 2-4 darbo dienas

Atsiimkite nemokamai.
Paruošime per 2-4 darbo dienas

Specifikacija

CPU frequency	800 MHz	Embeeded battery	No
Ethernet LAN (RJ-45) ports	1	Ethernet LAN data rates	10/100/1000Mbit/s
Form factor	Pole, Wall or Mast Mountable	Gigabit Ethernet (copper) ports quantity	1
Gross depth (mm)	240.00mm	Gross height (mm)	60.00mm
Gross weight	1.68kg	Gross width (mm)	320.00mm
Mesh Support	No	Mobile Broadband	No mobile broadband
MU-MiMO	No	Net weight	1.20kg
Operating system installed	RouterOS	Operating temperature (T-T)	-40°C to 70°C °C
Other features	netFiber 9 is a powerful outdoor switch with SFP, SFP+, and Gigabit Ethernet. It features a powerful ARM v7 CPU, 256 MB of RAM, 4x 10G SFP+ ports, and an advanced Marvell switch-chip that can handle even the heaviest loads. The Gigabit Ethernet port is not just for management purposes. It has a direct connection to the switch chip – so you can enjoy full gigabit speed. This port also supports PoE-in, so you don’t have to rely on the DC jack for powering in tight, hard- to-reach spots. There is a console port, followed by five regular SFP ports and four SFP+ ports for that sweet 10 Gbps networking. This means there might be quite a lot of wires for you to organize at some point. That’s why we designed the case to have some handy little additional features on the bottom of the case to help you keep everything neat and tidy. The sturdy case provides decent protection in dusty environments with occasional splashes of water. Perfect for outdoors with some light coverage – like a roof overhang or a simple cabinet. There is a massive heatsink on the back that serves two purposes. Not only it provides outstanding heat dissipation, it also moves the center of mass towards the side with all the mounting options – keeping the board firm and strong upon installation. The package includes metal hose clamps and screws, so you can attach the netFiber to a pole, wall, or mast right away. netFiber 9 is an amazing tool for anyone working with connections over 100 meters while keeping data loss and ping low. Optic fiber can be a great alternative to copper if you are worried about electromagnetic interference or maybe even tampering and eavesdropping. With 10 ports, a powerful CPU, and a rugged case, netFiber 9 is a real bargain that will make your network management so much easier!	Packing quantity	1.00pc(s)
Palette Qty	375pc(s)	Paper/Pasteboard	427.00g
Plastic (No PET)	48.00g	POE	PoE passive
PoE in	802.3af/at	Power consumption (max)	16.3 W W
Predominant port type	10/100/1000 Mbps (RJ-45)	Processor model	98DX226S
Producer	MikroTik	Producer product family	Cloud Router Switch
Producer product name	CRS310-1G-5S-4S+OUT, NetFiber 9	SFP ports quantity	5
SFP+ ports quantity	4	Software type	RouterOS
Storage capacity	16 MBMB	Tare weight (kg)	0.48kg
Voltage	18-57 VV	Volume (m3)	0.00m³
Warranty	12month(s)	WEE classification	CL109:6:2017-04-01
WEEE tax	Yes	Wi-Fi band	No Wi-Fi

CPU frequency	800 MHz
Embeeded battery	No
Ethernet LAN (RJ-45) ports	1
Ethernet LAN data rates	10/100/1000Mbit/s
Form factor	Pole, Wall or Mast Mountable
Gigabit Ethernet (copper) ports quantity	1
Gross depth (mm)	240.00mm
Gross height (mm)	60.00mm
Gross weight	1.68kg
Gross width (mm)	320.00mm
Mesh Support	No
Mobile Broadband	No mobile broadband
MU-MiMO	No
Net weight	1.20kg
Operating system installed	RouterOS
Operating temperature (T-T)	-40°C to 70°C °C
Other features	netFiber 9 is a powerful outdoor switch with SFP, SFP+, and Gigabit Ethernet. It features a powerful ARM v7 CPU, 256 MB of RAM, 4x 10G SFP+ ports, and an advanced Marvell switch-chip that can handle even the heaviest loads. The Gigabit Ethernet port is not just for management purposes. It has a direct connection to the switch chip – so you can enjoy full gigabit speed. This port also supports PoE-in, so you don’t have to rely on the DC jack for powering in tight, hard- to-reach spots. There is a console port, followed by five regular SFP ports and four SFP+ ports for that sweet 10 Gbps networking. This means there might be quite a lot of wires for you to organize at some point. That’s why we designed the case to have some handy little additional features on the bottom of the case to help you keep everything neat and tidy. The sturdy case provides decent protection in dusty environments with occasional splashes of water. Perfect for outdoors with some light coverage – like a roof overhang or a simple cabinet. There is a massive heatsink on the back that serves two purposes. Not only it provides outstanding heat dissipation, it also moves the center of mass towards the side with all the mounting options – keeping the board firm and strong upon installation. The package includes metal hose clamps and screws, so you can attach the netFiber to a pole, wall, or mast right away. netFiber 9 is an amazing tool for anyone working with connections over 100 meters while keeping data loss and ping low. Optic fiber can be a great alternative to copper if you are worried about electromagnetic interference or maybe even tampering and eavesdropping. With 10 ports, a powerful CPU, and a rugged case, netFiber 9 is a real bargain that will make your network management so much easier!
Packing quantity	1.00pc(s)
Palette Qty	375pc(s)
Paper/Pasteboard	427.00g
Plastic (No PET)	48.00g
POE	PoE passive
PoE in	802.3af/at
Power consumption (max)	16.3 W W
Predominant port type	10/100/1000 Mbps (RJ-45)
Processor model	98DX226S
Producer	MikroTik
Producer product family	Cloud Router Switch
Producer product name	CRS310-1G-5S-4S+OUT, NetFiber 9
SFP ports quantity	5
SFP+ ports quantity	4
Software type	RouterOS
Storage capacity	16 MBMB
Tare weight (kg)	0.48kg
Voltage	18-57 VV
Volume (m3)	0.00m³
Warranty	12month(s)
WEE classification	CL109:6:2017-04-01
WEEE tax	Yes
Wi-Fi band	No Wi-Fi